4-4 IPStar Operation Manual
Using Direct-IP Mode
Note:
IP1000 and IP2000 are DSG’s Internet Telephony products. IP1000 is a stand-
alone Internet telephony gateway and IP2000 is an NT-based Internet telephony gateway.
Please check www.dsgtechnology.com for further information.
IPStar has the ability to communicate with other compatible Internet Telephony products,
such as DSG IP1000 and DSG IP2000 Internet Telephony Gateways*. By setting the IP
Address of the receiving gateway, IPStar will route the call to an extension or PSTN via
these compatible gateways. There are more than one way to use the Direct-IP mode such
as A) 2-Button Trigger and B) Direct-IP Address Calling.
Using Direct-IP Mode
1.
Make sure that the IPStar has successfully
connected to the Internet.
2.
Pick up the telephone receiver.
3.
Press
## on the telephone keypad.
4.
The IPStar will try to connect to the IP
Address that is setup in the Internet setup
section.
5.
During the connecting process, the IP Address
will be displayed on the LCD screen.
A. 2-Button Trigger (only with
initial Direct-IP Setup)
1.
Make sure that the IPStar has successfully
connected to the Internet.
2.
Pick up the telephone receiver.
B. Direct-IP Address Calling
I P S t a r
@
0 1 : 4 9 : 4 7
1 6 8 . 9 5 . 1 . 1
I P S t a r
@
0 1 : 5 2 : 1 0
1 9 2 . 1 6 8 . 1 . 1
