Chapter 5 Maintenance
47
IP Phone Setup
The IP Phone Settings of IP590 are as follows. Please don’t change the settings
unless required by your administrator.
1.
Follow the on-screen guidance, press Menu soft key and press L2 line button
to enter the setting mode.
2.
Input your password. The default password is “1234”.
3.
In the setting mode, using soft keys and line buttons to scroll pages and
setting items.
y
Ext Number: Your extension number.
y
Network Settings: IP590 supports static IP and DHCP.
- Static IP: If a static IP can be provided, input the IP Address, Gateway IP
and Subnet Mask of your phone.
- DHCP: If your network is under DHCP, you need to enable DHCP.
y
PBX Server IP: The IP address of your Blaze/Savanna Server.
y
MAC Address: The hardware address of your phone. It cannot be changed.
y
Image Version: It displays the current software version of your IP phone.
y
Set Password: You may change the password for logging in to the phone. If
it is blank, the password will not be required when entering the setting
mode. The default password is “1234”.
y
Echo Utility: You may input the PBX Server IP here and press Test. The
phone set will send testing packets to the assigned IP address and reply the
round trip time. This can help you test the connection status with the PBX
server.
Summary of Contents for IP590
