DSG Technology IP1200C, Operation Manual, Page: 19 / 48

Chapter 3 Configuring Your IP1200C 17
New Long Distance Code (digits, press ESC to exit): 1
Press any key to continue...
International Code
Step 1 At the prompt displays Select the option to setup: , input <10> and press ENTER to edit International
Code.
Step 2 After the prompt displays New International Code (digits, press ESC to exit): , input your international
access code <xx...> and then press ENTER.
Prompt example:
If you are in the US, your international access code is 011. Input it as follows.
Select the option to setup: 10
New International Code (digits, press ESC to exit): 011
Press any key to continue...
Country Code
Step 1 At the prompt displays Select the option to setup: , input <11> and press ENTER to edit Country Code.
Step 2 After the prompt displays New Country Code (digits, press ESC to exit) :, input your country code <xx...>
and then press ENTER.
Prompt example:
If you are in the US, your country code is 1. Input it as follows.
Select the option to setup: 11
New Country Code (digits, press ESC to exit): 1
Press any key to continue...
Security Setup
This sector provides the necessary password setup for the configuration and access of IP1200C. In order to prevent
the potentially disclosure of your password, the alphabet or digits you entered will be encrypted as star signs
“****” at the renewal prompt.
Password for FXO
The FXO interface provides connection to PSTN or a PBX extension-side. After you setup a password for FXO,
access to IP1200C FXO ports will be required to input the FXO password.
Step 1 At the prompt displays Select the option to setup: , input <12> and press ENTER to edit Password for
FXO.
Step 2 After the prompt displays New FXO Password (digits, press ESC to exit): , input the password <xx...> and
then press ENTER.
Note: The maximum length of the password is 10 digits. If you leave it as blank, anyone can access to IP1200C
without a password.
Prompt example:
If you would like to set a password for users accessing FXO ports as 1234567890, input it as follows.
Select the option to setup: 12
New FXO Password (digits, press ESC to exit): 1234567890
Press any key to continue...
Password for FXS