manualshive.com logo in svg

DSE RN-600C, User Manual, Page: 71 / 80

Share
Download
DSE RN-600C User Manual Download Page 71

USER MANUAL

Megapixel H.264 IP CAMERAS 

Page:

 71   

Page:

 71   

DSE SRL - ITALY - WWW.DSE.EU 

Server Maintenance

This page provides tools for maintenance of the camera system on board. 

REBOOT

 - Reboot the camera 

REBOOT

 - Reboot the camera 

LOAD DEFAULT

 - Restore the factory parameters 

LOAD DEFAULT

 - Restore the factory parameters 

UPGRADE

 - Allows you to choose and to send a new updated Camera Firmware 

UPGRADE

 - Allows you to choose and to send a new updated Camera Firmware 

BACK UP 

- Save the camera configuration in a file .TGZ 

BACK UP 

- Save the camera configuration in a file .TGZ 

UPLOAD

 - Allows you to send to a previously saved configuration Camera 

UPLOAD

 - Allows you to send to a previously saved configuration Camera 

ADD LANGUAGE

 - This command is useful if you want to translate the English text web interface of the camera or change it at will. E 

ADD LANGUAGE

 - This command is useful if you want to translate the English text web interface of the camera or change it at will. E 

'can by clicking the link in blue, from the camera to download the file containing all the web interface texts in the international factory 

language (English) and translate them into any language using any text editor such as notepad windows With the command

 UPLOAD 

language (English) and translate them into any language using any text editor such as notepad windows With the command

 UPLOAD 

LANGUAGE

 you can send the translated file to the camera.  

LANGUAGE

 you can send the translated file to the camera.  

Summary of Contents for RN-600C

















































































Reviews:

No comments