manualshive.com logo in svg

DSE RN-600C, User Manual, Page: 16 / 80

Share
Download
DSE RN-600C User Manual Download Page 16

USER MANUAL

Megapixel H.264 IP CAMERAS 

Page:

 16   

Page:

 16   

DSE SRL - ITALY - WWW.DSE.EU 

3. The camera's video output connects to the VIDEO IN BNC male  

4. Connect the power supply plug 12VDC 

5. The power supply 220VAC / 12VDC is supplied with the appliance 

6. LED on the right is the corrected power 12V LED = left in a 

proper network connection  

Installing Software 

The CD supplied with the camera software is included 

IP INSTALLER

 which must be installed on a PC connected to the network 

The CD supplied with the camera software is included 

IP INSTALLER

 which must be installed on a PC connected to the network 

The CD supplied with the camera software is included 

IP INSTALLER

 which must be installed on a PC connected to the network 

in which you will connect the camera. The function of this software is to detect the presence of the camera network regardless of 

the class of addresses used on your network and allow you to configure the network address of the camera so as to be consistent 

with your network. We recall that because the camera is visible from the other PCs on the network it is necessary that the first 3 

address parts are the same as other network PC and is equal also the subnet mask.

Network Configuration 

The IP Installer is a program that makes it easy and very efficient configuring IP address and the device's network settings. 

Preliminary checks for network configuration

Before you must obtain from your network some information about the management of the IP addresses used on your network. E 

'need to know an IP address can be assigned to the camera that is not equal to any other device already present in the network. 

At this point it is possible to feed the camera and connect the network cable. The wired connection is essential also in the 

installation of Wi-Fi cameras to enable the wireless connection. If you are unsure about your network's operation you can use 

certain commands in DOS PROMPT

On a network PC launched a DOS window available between the Windows accessory programs. 

Type IPCONFIG at the command prompt and press ENTER. They will see the TCP / IP parameters. The second line is the IP 

address assigned to your computer.

Summary of Contents for RN-600C

















































































Reviews:

No comments