DSE RN-600C, User Manual, Page: 59 / 80

USER MANUAL
Megapixel H.264 IP CAMERAS
Page: 59 Page: 59
DSE SRL - ITALY - WWW.DSE.EU
UPnP: enables the UPnP (universal plug and play). Enable UPnP (Universal Plug and Play) is highly recommended to make sure that Windows UPnP: enables the UPnP (universal plug and play). Enable UPnP (Universal Plug and Play) is highly recommended to make sure that Windows
Explorer can automatically detect the cameras between the network resources.
NAT Traversal: Enable NAT TRAVERSAL so that from the Internet clients can easily access the camera placed behind the router. With the NAT Traversal: Enable NAT TRAVERSAL so that from the Internet clients can easily access the camera placed behind the router. With the
UPnP enabled routers that support this dialogue function with the camera to set the directing of the doors you need to communication from the
Internet to the local network.
SMTP (E-Mail)
The RN Series cameras can send E-mails after alarm events. In this section you set the parameters for the
SMTP server for sending e-mail.
Mail Server: Name of the SMTP server that is used for sending email Mail Server: Name of the SMTP server that is used for sending email
Server Port: Port used for sending emails Server Port: Port used for sending emails
Authentication: If the SMTP server requires a user name and password to send email you can place Authentication: If the SMTP server requires a user name and password to send email you can place
from: Enter the sender address that will appear in the email sent by the camera. from: Enter the sender address that will appear in the email sent by the camera.
Test: E 'can enter an email address and send a test email by pressing SEND to check the proper functioning. Test: E 'can enter an email address and send a test email by pressing SEND to check the proper functioning.