DSE RN-600C User Manual Download Page 10

Page: 10 / 80

USER MANUAL

Megapixel H.264 IP CAMERAS

Page:

DSE SRL - ITALY - WWW.DSE.EU

RN-636E

On the front of the camera are present microphone and speaker for audio as well as a light sensor for day / night function and the

RESET button. By turning the lens you can adjust the FOCUS. On the back there are the following connections.

12VDC

- Jack to which connect a power supply 220VAC / 12VDC min. 2 A (not supplied). The power supply is not necessary if you use

12VDC

- Jack to which connect a power supply 220VAC / 12VDC min. 2 A (not supplied). The power supply is not necessary if you use

the PoE power through the network cable (requires PoE switch or PoE injectors)

RJ45 -

RJ45 connector to connect the network. Use CAT5 cable

RJ45 -

RJ45 connector to connect the network. Use CAT5 cable

MICRO SD

- Slot to insert a MicroSD card to save aboard the same camera images

MICRO SD

- Slot to insert a MicroSD card to save aboard the same camera images

AUDIO

- This 3.5 mm jack lets you connect a microphone for sound environmental recovery. The camera is also equipped with a built-in

AUDIO

- This 3.5 mm jack lets you connect a microphone for sound environmental recovery. The camera is also equipped with a built-in

microphone. The use of incroporato microphone or the external microphone is set in programming.

AUDIO OUTPUT

- This 3.5 mm jack allows you to connect the local speakers. This feature allows you to create a two-way audio

AUDIO OUTPUT

- This 3.5 mm jack allows you to connect the local speakers. This feature allows you to create a two-way audio

conversation between the person in front of the camera and the operator in front of the client PC.

GPIO

- This terminal is used to connect the inputs and outputs to control local alarm and signaling contacts. The terminal functions

GPIO

- This terminal is used to connect the inputs and outputs to control local alarm and signaling contacts. The terminal functions

are as follows PIN

RIFER.

DESCRIPTION

GND

4 the alarm digital inputs for connecting sensors or external contacts.

DI4

The ON / OFF type contacts are connected between the input terminal and the GND.

4 DI3

DI2 5

DI1 6

GIFT

Alarm output normally open (NO). It is a relay contact able to control an external device. The max.

drivable current is 130mA. To drive of greater absorption equipment resorting to an external relay.

COM

Summary of Contents for RN-600C

















































































Search results

Summary of Contents for RN-600C

Reviews:

DSE RN-600C, User Manual, Page: 10 / 80

Search results

Summary of Contents for RN-600C

Reviews: