DSE RN-600C, User Manual, Page: 20 / 80

USER MANUAL
Megapixel H.264 IP CAMERAS
Page: 20 Page: 20
DSE SRL - ITALY - WWW.DSE.EU
5. In the Properties window, you can enter all network data necessary to integrate the camera into your network. Check especially to
set an address with class and subnet mask similar to those used by your network. In the following figure, for example, the address
class is 192.168.2 and the last number 42 is the camera identifier. The subnet mask is 255.255.255.0. Once you have entered the
properties, click the SET button to transfer the configuration to the camera.
The IP Installer program also has some additional functions:
SAVE / SAVE AS - Allow to save the list of devices detected by IP Installer in a file that you can then open off-line but not connected to SAVE / SAVE AS - Allow to save the list of devices detected by IP Installer in a file that you can then open off-line but not connected to
the network.
INSERT SERVER - Allows you to enter the camera's IP parameters from scratch, without having it detected with the search function. INSERT SERVER - Allows you to enter the camera's IP parameters from scratch, without having it detected with the search function.
DEF. USER PASSWORD - The modification of the IP parameters that is carried out by IP Installer provides you access the camera DEF. USER PASSWORD - The modification of the IP parameters that is carried out by IP Installer provides you access the camera
configuration, an operation that requires the use of USER NAME and PASSWORD. The factory in the RN series cameras are set to the
following values: USER: admin PASSWORD: admin. For IP INSTALLER logic also uses the same factory admin / admin values. In this following values: USER: admin PASSWORD: admin. For IP INSTALLER logic also uses the same factory admin / admin values. In this following values: USER: admin PASSWORD: admin. For IP INSTALLER logic also uses the same factory admin / admin values. In this
window you can change the data of dafult access to suit your needs. In the properties of each camera (see the previous figure) it is still
possible to individually modify the access parameters for each camera by clicking USE CUSTOM and typing them freely.
Opening web user interface
1. Once properly set the network parameters, you can make the first access to the