DSE DSE7210, Operator'S Manual, Page: 64 / 160

DSE7200 / 7300 Series Operators Manual
64
5.4.1 STATUS
This is the ‘home’ page, the page that is displayed when no other page has been selected, and the page that is
automatically displayed after a period of inactivity (
LCD Page Timer) of the module control buttons.
This page is configurable using the DSE Configuration Suite Software.
Status 22:31
Generator at Rest
Stop Mode
Safety On Delay
L-N 215V 43A
L-L 373V 47.5Hz
0KW 0.00pf
Factory setting of Status screen showing engine stopped...and engine running.
The contents of this display may vary depending upon configuration by the generator manufacturer / supplier.
The display above was achieved with the factory settings, shown below in the DSE Configuration suite software:
NOTE:- The following sections detail instrumentation pages, accessible using the scroll left and right
buttons, regardless of what pages are configured to be displayed on the ‘status’ screen.
‘Stop Mode’ etc is
displayed on the
Home Page
With a summary of the
instrumentation shown when
the engine is running.
Other pages can be configured to
be shown, automatically scrolling
when the set is running.