14
G E T T I N G S T A R T E D
Program Descriptions
The following section explains the operation of all programmable
features and options and provides a summary of all corresponding
programming locations.
5.1 Programming Security Codes
There are three codes which can be programmed by the
installer in the Installer’s Programming function: the Master
Code, a Second Master Code, and the Installer’s Code. All
other access codes can be programmed through the [
✱
] [5]
command (see Section 3.4).
The Master Code can also be programmed by the user as
access code (1). If the
Master Code Not Changeable
option is enabled, the System Master Code can only be
changed by the Installer.
User codes can arm and disarm the system. By selecting
the
No Code Required for Bypassing
option, each user
code can also have the ability to bypass zones without
entering the Master Code.
If the
Sixth Code is Duress Code
option is enabled, the
sixth code can be programmed by the user as a Duress
Code which will send a Duress Reporting Code to the
central station when entered.
If the
6-Digit User Access Codes
option is enabled, all the
access codes may be programmed with six digits instead of
four, with the exception of the Panel ID code and the
Downloading Access Code.
Installer’s Code ....................................................... Section [03]
Master Code ............................................................ Section [04]
Second Master Code .............................................. Section [05]
Master Code Not Changeable ............. Section [09], option [1]
No Code Required for Bypassing ........ Section [09], option [2]
Sixth Code is Duress Code .................. Section [09], option [3]
6-Digit User Access Codes .................. Section [81], option [4]
When enabling 6-digit access codes, if the master
code is anything other than default, the last two
digits will be [00].
5.2 Zone Definitions
These sections will allow you to select how each of the 6
zones will operate. Each zone requires a two digit entry. In
addition to zone definitions, six different attributes may be
programmed by zone (see Section 5.3 – “Zone Attributes”).
[00] Null Zone
The zone is vacant. Unused zones should be programmed
as Null zones.
[01] Delay 1
This zone type, normally used for entry/exit doors, can be
violated during the exit delay time without causing an alarm.
Once the exit delay has expired, opening the zone will start
the entry delay timer. During the entry delay time, the
keypad buzzer will sound steadily to advise the user that the
system should be disarmed. If the panel is disarmed before
the entry time expires, no alarm will be generated.
[02] Delay 2
The Delay 2 entry delay time can be set independent of Delay
1 in programming section [02] (System Times).
S
E
C
T
I
O
N
5
[03] Instant Zone
This zone type will cause an instant alarm if it is violated
when the panel is armed. Typically, this zone is used for
windows, patio doors or other perimeter zones.
[04] Interior Zone
This zone will not cause an alarm if violated during the entry
delay. If the zone is violated before the entry delay has
begun, it will cause an instant alarm. Typically, this zone is
used for interior protection devices, such as motion detectors.
[05] Interior Stay / Away Zone
This zone type works similar to the Interior zone type except
that it will be automatically bypassed under the following
conditions:
• When the panel is armed in the Stay Mode (see Section
3.5 – “Function Keys”).
• When the panel is armed without entry delay (see
Section 3.4 – “[
✱
] [9] Arming Without Entry Delay”).
• When the panel is armed with a user code and a Delay
type zone is NOT tripped during the exit delay.
The automatic bypass prevents the user from having to
manually bypass interior type zones when arming at home.
This zone is typically used for interior protection devices,
such as motion detectors.
[06] Delay Stay / Away Zone
This zone type will operate similar to Interior Stay/Away zones
except that it will always provide an entry delay. Typically, this
zone is used for interior protection devices, such as motion
detectors. This zone option will help prevent false alarms
since it always provides an entry delay time for the user to turn
off the panel.
[07] Delayed 24 Hour Fire Zone
When this zone is violated, the alarm output will be
immediately activated but the communicator will be delayed
for 30 seconds. If the user presses any key on any keypad
during this delay, the alarm output and the communicator
will be delayed an additional 90 seconds, giving the user
time to correct the problem. If the zone is still violated after
the 90 second delay, the panel will sound the alarm ouput
and delay the communicator for 30 seconds.
If the user does not press a key during the 30 second delay,
the alarm output will latch and the panel will communicate
the alarm to the central station. The alarm will sound for the
Bell Cutoff time programmed in Section [02] (“System
Times”).
If a second Fire type zone is violated or if the Fire
keys are pressed during the delay period, the panel
will latch the alarm output and will immediately
communicate the alarm.
A violated Fire zone will be displayed on all keypads and
can be delayed at any keypad. Typically this zone is used
for latching smoke detectors.
[08] Standard 24 Hour Fire Zone
When this zone is violated, the panel will immediately latch
the alarm output and communicate to the central station.
The alarm will sound for the Bell Cutoff time programmed in
Section [02] (“System Times”).
A violated Fire zone will be displayed on all keypads.
Typically this zone is used for pull stations.