10
Binary Data Display
Zone lights 1 through 4 are used to display the value, in binary
format, of the data as shown in the table below.
Hex Data Entry*
Value
Zone 1
Zone 2
Zone 3
Zone 4
Light On
Light Off
*
See Hex Data Entry instructions
HEX Data Programming
Certain programming entries may require the entry of data in
HEX (hexadecimal, or base 16) format. HEX numbering uses
the digits 0 through 9 and the letters A through F.
The letters A through F are represented by the number keys
1 through 6. To enter data in HEX format, first press the [
∗
] key.
The “Ready” light will flash. Enter the HEX value, then press
the [
∗
] key again to return to the normal entry mode. The
“Ready” light will stop flashing.
To enter HEX numbers:
A
➤
Enter [
∗
][1][
∗
]
B
➤
Enter [
∗
][2][
∗
]
C
➤
Enter [
∗
][3][
∗
]
D
➤
Enter [
∗
][4][
∗
]
E
➤
Enter [
∗
][5][
∗
]
F
➤
Enter [
∗
][6][
∗
]
Enter [
∗
]
before
and
after
each digit. The last digit in each
section does not require the final asterisk ([
∗
]) to be entered.