6
Install 4 AA batteries in the LINKS1000 Programmer, being sure to note proper orientation. If the batteries are
installed incorrectly, the Programmer will not function.
Using the Keypad
Operation of the Programmer is as simple as scrolling through the menu to find the desired programming
option and pressing the [
✱
✱
✱
✱
✱
] Key to select the option.
• Use the
and
keys to scroll through the menu displays to locate the desired menu or programming item
• When the screen displays the desired menu item or programming option, press the [
✱
✱
✱
✱
✱
] Key to select the
item or option
• The Programmer will automatically shut itself off if there is no keypad activity for a period of 2 minutes.
NOTE: The LINKS1000 will not function until the Programmer is unplugged from it.
Programmer Low Battery Indication
If the Programmer’s batteries begin to run low, this message will be displayed:
*
PROGRAMMER
*
*
LOW BATTERY
*
The low battery message will remain on the screen for 3 seconds or until it is acknowledged by pressing any
key while it is displayed. If a key is pressed while the message is displayed, the message will not reappear
for the rest of the programming session.
If the message is not acknowledged, it will be removed from the screen after 3 seconds; the next time a key
is pressed, the low battery message will again be displayed.
SETTING UP THE PROGRAMMER
