22
Yes:
Zone 1 enabled for LINKS supervisory
No:
Zone 1 not enabled for LINKS supervisory
Note: When this option is enabled, the PC4010/PC4020/PC4020KT will automatically
reprogram the Zone Type and Options for Zone 1 for LINKS Supervisory
functions. When enabled, Zone 1 will be used to monitor the LINKS module for
trouble conditions. The Zone Type cannot be changed until the LINKS Supervisory
option is disabled. Note that an end-of-line resistor
must be used with this zone.
Yes:
Zone 2 LINKS Answer Enabled
No:
Zone 2 LINKS Answer Disabled
Note: When this option is enabled, the PC4010/PC4020/PC4020KT will automatically
reprogram the Zone Type and Options for Zone 2 for LINKS Answer functions.
When enabled, Zone 2 will be used for downloading through the LINKS module.
The Zone Type cannot be changed until the LINKS Answer option is disabled.
Note that an end-of-line resistor
must not be used with this zone.
Enter the LINKS Module programming section by entering [
∗
][8][Installer’s
Code][0][04][4]. Program the following in the Links Module programming section:
LINKS Telephone Numbers
First Phone Number. When the LINKS module is enabled, this telephone number
will be used to back up the first land line telephone number should the land line fail
the dial tone search.
Second Phone Number. When the LINKS module is enabled, this telephone
number will be used to back up the second land line telephone number should the
land line fail the dial tone search.
Third Phone Number. When the LINKS module is enabled, this telephone number
will be used to back up the third land line telephone number should the land line fail
the dial tone search.
DLS (Downloading) Number. When the LINKS module is enabled, this telephone
number will be used to download via LINKS1000 cellular.
Programming Telephone Numbers
Enter the telephone number the way it would be dialed on a telephone. The total number of digits, including
dial tone searches, must not exceed 31. Note that a “D” for a dial tone search is automatically programmed
at the beginning of the telephone number.
Note: There must be a dial tone search programmed into the
telephone number for the LINKS module to operate.
When a telephone number is entered, press the [#] key to save the number in the system’s memory.
PC4010/PC4020/PC4020KT Telephone Entry Options Menu
Press the [
∗
] key to enter the Telephone Entry Options Menu. Use the arrow keys to scroll through the list of
menus, and press the [
∗
] key to select the menu displayed on the keypad screen. Or, enter [0] or [1] to select
one of the menu options described below:
[0] Save After entering a telephone number, instead of pressing the [#] key, this option may be selected to
save the number in the system’s memory.
[1]
Dial Tone Selecting this option will add a 2-second dial tone search to the telephone number. The dial
tone search will be represented by a “D” in the telephone number display. A dial tone search forces the
control panel to wait for a dial tone before dialing a telephone number.
