DSC LE2080 Installation Manual Download Page 51

Page: 51 / 60

[748] High Temperature Alarm

Default (High Temperature Alarm)
_______________________________________

[749] High Temperature Alarm Restore

Default (High Temperature Alarm Restore)
_______________________________________

[750] Medical Alarm

Default (Medical Alarm)
______________________________________

[751] Medical Alarm Restore

Default (Medical Alarm Restore)
______________________________________

[752] Panic Alarm

Default (Panic Alarm)
______________________________________

[753] Panic Alarm Restore

Default (Panic Alarm Restore)
______________________________________

[754] Emergency Alarm

Default (Emergency Alarm)
_______________________________________

[755] Emergency Alarm Restore

Default (Emergency Alarm Restore)
______________________________________

[756] Sprinkler Alarm

Default (Sprinkler Alarm)
_______________________________________

[757] Sprinkler Alarm Restore

Default (Sprinkler Alarm Restore)
_______________________________________

[758] Water Level Alarm

Default (Water Level Alarm)
_______________________________________

[759] Water Level Alarm Restore

Default (Water Level Alarm Restore)
_______________________________________

[760] Low Temperature Alarm

Default (Low Temperature Alarm)
_______________________________________

[761] Low Temperature Alarm Restore

Default (Low Temperature Alarm Restore)
_______________________________________

[762] Fire Supervisory

Default (Fire Supervisory)
_______________________________________

[763] Fire Supervisory Restore

Default (Fire Supervisory Restore)
_______________________________________

[764] CO Alarm

Default (CO Alarm)
_______________________________________

[765] CO Alarm Restore

Default (CO Alarm Restore)

_______________________________________

[766] Water Alarm

Default (Flood Alarm)
_______________________________________

[767] Water Alarm Restore

Default (Flood Alarm Restore)
_______________________________________

[768] Quick Bypass Alarm

Default (Quick Bypass Alarm)
_______________________________________

[769] Quick Bypass Alarm Restore

Default (Quick Bypass Alarm Restore)
_______________________________________

[770] Aux Alarm

Default (Aux Alarm)
_______________________________________

[771] Aux Alarm Restore

Default (Aux Alarm Restore)
_______________________________________

[772] Zone Expander Supervisory Alarm

Default (Zone Expander Supervisory Alarm)
_______________________________________

[773] Zone Expander Sup. Alarm Restore

Default (Zone Expander Sup. Alarm Restore)
_______________________________________

[774] Duress Alarm

Default (Duress Alarm)
_______________________________________

[775] Account Label

Default (Security System)
_______________________________________

[776] General System Tamper

Default (General System Tamper)
_______________________________________

[777] General System Tamper Restore

Default (General System Tamper Restore)
_______________________________________

[778] General System Trouble

Default (General System Trouble)
_______________________________________

[779] General System Restore

Default (General System Restore)
_______________________________________

[780] Panel AC Power Trouble Label

Default (AC Power Trouble)
_______________________________________

[781] Panel AC Power Restore Label

Default (AC Power Restore)
_______________________________________

[782] Panel Auxiliary Power Trouble

Default (Auxiliary Power Trouble)
______________________________________

Summary of Contents for LE2080





























































Search results

Summary of Contents for LE2080

Reviews:

Related manuals for LE2080

Brands by name

Popular brands

DSC LE2080, Installation Manual

Search results

Summary of Contents for LE2080

Reviews:

Related manuals for LE2080

Brands by name

Popular brands