3
V
P
M
5
5
8
0
T
C
T
hank you for purchasing the DSC VPM5580TC module. When connected to the main control panel, the
module turns any Touch-Tone* telephone – local or remote – into a fully functional keypad. Once activated,
the VPM5580TC will act as a guide for the user. The VPM5580TC will prompt the user through clear, easy
to understand sentences, telling them what the next key entry should be to perform the various functions
available.
I
n addition to an expanded library of over 250 system words, a powerful “say number” command has been
added to the VPM5580TC. This new feature allows any number between zero and 999 to be said in three
different ways. Up to six words can be used for Zone Labels, Automation Items, Automation Modes and
System Labels, thereby enhancing the VPM5580TC’s versatility.
A
new feature on the VPM5580TC is built-in temperature control for furnaces and air conditioners. This
feature allows the VPM5580TC to control up to four EMS thermostats. Each thermostat has four programmable
temperature ranges called occupancy settings. Each occupancy setting can be turned on by the user, or
by the VPM5580TC with schedules, panel events and/or modes.
T
he module also has a built-in line carrier interface. This feature allows the module to control up to 32 line
carrier Automation type items for lighting control, other home Automation features. Automation items can
be can be turned on by the user, or by the VPM5580TC with schedules, panel events and/or modes. A full
range of dimming levels are also available for lighting control.
W
e are confident that you and your customer will discover that the VPM5580TC module is the most useful
alarm control panel enhancement product available on the market today.
W
e welcome your input. Please send your comments to:
Digital Security Controls
c/o VPM5580TC Product Manager
3301 Langstaff Road
Concord, Ontario
L4K-4L2
54
Appendix E
The Access Code Programming function allows you to program access codes that will function on the
security system as well as on the VPM5580TC. The system can be set to accept 4 or 6 digit user codes.
Depending on what model of security system you have, you may have the ability to program either 6 or
37 access codes. To program these user codes, follow these steps:
1. With the system disarmed, access the security system using the steps described in the Accessing
Your Security System and Accessing Partitions section of this manual.
2. Press [ ]. When the system announces:
“For User Code Programming, press [5].”
“For User Code Programming, press [5].”
“For User Code Programming, press [5].”
“For User Code Programming, press [5].”
“For User Code Programming, press [5].”
press [5]. The system will then announce:
“““““Enter Y
Enter Y
Enter Y
Enter Y
Enter Your Master Code:”
our Master Code:”
our Master Code:”
our Master Code:”
our Master Code:”
3. Enter your master access code. The system will then announce:
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/two- digit user number.
o- digit user number.
o- digit user number.
o- digit user number.
o- digit user number.
For User Option
For User Option
For User Option
For User Option
For User Option Programming, press [9].
Programming, press [9].
Programming, press [9].
Programming, press [9].
Programming, press [9].
User X, Y and Z are programmed. T
User X, Y and Z are programmed. T
User X, Y and Z are programmed. T
User X, Y and Z are programmed. T
User X, Y and Z are programmed. To exit, press [#].”
o exit, press [#].”
o exit, press [#].”
o exit, press [#].”
o exit, press [#].”
Your system may or may not prompt you with “User Option Programming”. Please
consult your security system instruction manual for more information on user options.
4. Enter the number of the access code that you wish to program at this time. The system will
announce:
“Enter the ne
“Enter the ne
“Enter the ne
“Enter the ne
“Enter the new 4-/6- digit access code.
w 4-/6- digit access code.
w 4-/6- digit access code.
w 4-/6- digit access code.
w 4-/6- digit access code.
T
T
T
T
To exit, press [#].”
o exit, press [#].”
o exit, press [#].”
o exit, press [#].”
o exit, press [#].”
5. Enter the new code at this point. You will again be prompted by the message:
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/tw
“User Code Programming. Enter the one-/two- digit user number.
o- digit user number.
o- digit user number.
o- digit user number.
o- digit user number.
For User Option Programming, press [9].
For User Option Programming, press [9].
For User Option Programming, press [9].
For User Option Programming, press [9].
For User Option Programming, press [9].
Users X, Y and Z are programmed. T
Users X, Y and Z are programmed. T
Users X, Y and Z are programmed. T
Users X, Y and Z are programmed. T
Users X, Y and Z are programmed. To exit, press [#].”
o exit, press [#].”
o exit, press [#].”
o exit, press [#].”
o exit, press [#].”
6. If you wish to program another access code, enter the user number. If not, press [#] to return to
the main menu.
A C C E S S
C O D E
P R O G R A M M I N G
* Touch-Tone is a trademark of Stentor Resource Centre Inc.
firealarmresources.com
