16
[999]
Reset to Factory Default Settings
To reset the VPM4580 to the factory default
programming, enter [*][8][Service Code][999]. The
system will prompt
“Enter the Service Code”
“Enter the Service Code”
“Enter the Service Code”
“Enter the Service Code”
“Enter the Service Code”
Enter the Service Code. The system will prompt
“Enter the Section Number”
“Enter the Section Number”
“Enter the Section Number”
“Enter the Section Number”
“Enter the Section Number”
Enter [999]. The system will then prompt
“Factory Default in Progress”
“Factory Default in Progress”
“Factory Default in Progress”
“Factory Default in Progress”
“Factory Default in Progress”
Special Programming Sections
S e c t i o n 1 0
When the system reset is complete, the system will
prompt
“Factory Default is Complete”
“Factory Default is Complete”
“Factory Default is Complete”
“Factory Default is Complete”
“Factory Default is Complete”
NOTE:
The VPM4580 may also be reset using the
PC4010 or PC4020 VPM4580 Default function. Refer
to the PC4010 or PC4020 Programming Manual for
additional information.
firealarmresources.com
