15
Label Programming
Program the voice prompt labels for the following in
programming sections [451] through [864]:
• Automation Items
• Automation Modes
• Partitions
• Zones
• Output Controls
Each label can have up to 6 words. Refer to
Programming Worksheets Appendix B, "Word Library"
for a list of available words. Program a word into a
label by entering the word’s 3-digit code in the label’s
programming section. Refer to section 3,
"Programming" for general label programming
instructions.
Adding Numbers to Labels
Three special Number Commands are available to
allow the system to include a number in the voice label.
The number commands allow the system to announce
the number in three different modes:
Label 000: Number Command 1, Combined
Form.
The number will be announced
in its full form. For example, the
number 401 would be announced as
“four hundr
“four hundr
“four hundr
“four hundr
“four hundred and one”
ed and one”
ed and one”
ed and one”
ed and one”
.
Label 001: Number Command 2, Ordered Form.
The number will be announced in a
descriptive form. For example, the
number 401 would be announced as
“four hundr
“four hundr
“four hundr
“four hundr
“four hundred and first”
ed and first”
ed and first”
ed and first”
ed and first”
.
Label 002: Number Command 3, Individual
Numbers.
Each digit in the number
will be announced individually. For
example, the number 401 would be
announced as
“four zero one”
“four zero one”
“four zero one”
“four zero one”
“four zero one”
.
The number commands take up two of the six available
word spaces in a label. In the first space select the type
of announcement for the number (Number Command
000, 001 or 002). In the second space program the 3-
digit number to be read (from 000 to 999).
NOTE
: Because number commands take up 2 label
spaces, you cannot program them in the sixth entry
spot for a label.
[451] through [482]:
Automation Item Labels
Enter up to six 3-digit label codes for the labels for
automation items 01 through 32. Record the label in
the appropriate section of the Programming
Worksheets.
[521] through [528]:
Automation Mode Labels
Enter up to six 3-digit label codes for the labels for
automation modes 1 through 8. Record the label in
the appropriate section of the Programming
Worksheets.
[561] through [568]:
System Partition Labels
Enter up to six 3-digit label codes for the labels for
partitions 1 through 8. Record the label in the
appropriate section of the Programming Worksheets.
[601] through [728]:
System Zone Labels
Enter up to six 3-digit label codes for the labels for
zones 001 through 128. Record the label in the
appropriate section of the Programming Worksheets.
[801] through [864]:
Output Control Labels
Enter up to six 3-digit label codes for the labels for
output controls 1-8 in partitions 1-8. Record the label
in the appropriate section of the Programming
Worksheets.
S e c t i o n 9
firealarmresources.com
