DSC 3G3070 Installation Manual Download Page 14

Page: 14 / 24

number received at the Central Station when this panel communicates through a land-line.

Account code

An account code is required for communication with receivers. Enter the account code in this field.

No Activity Timeout

Select a value between 2 and 255 minutes (default 65min). If there is no cellular activity for the
programmed No Activity Time Out period, the device will discontent from the network. The 3G3070 will
reconnect once an event occurs which requires cellular communication. If programmed as 0, No Activity
Timeout will be disabled and the 3G3070 will always remain connected to the cellular network.

Dialing Attempts

Select the number of dialing attempts between 1 and 15 (default 2). When the panel attempts to
communicate to the receiver, the 3G3070 will count the number of attempts to each receiver. When the
programmed number of dialing attempts is reached, the 3G3070 will switch from primary receiver path
to the back up receiver path and reset the counter.

Supervision

Enable supervision and set the number of minutes in the supervisory period.

Panel Transmission Monitoring

Enter up to four 20-digit telephone numbers to be monitored and the number of failed attempts before
take over can be selected (default 4 attempts).
See the ‘Operating Principles’ section of this manual for Panel Transmission Monitoring functionality.

Panel Force Dial

When enabled, any instance of the panel going off hook (3 seconds or more) / on hook with no dialed
digits will be counted as a failed attempt. Enable the panel force dial feature if the control panel used
with the 3G3070 does not force dial (goes off hook but will not dial if there is no dial tone)

Status Page

This page allows real-time monitoring of all device functions.

ATTENTION:

The status page is updated every 5 seconds.

Status section

This section shows the cellular module data. This virtual display shows the network provider, the device
battery charge (for the precise level, position the mouse arrow on the battery icon for a several seconds)
and cellular signal strength (indicated by 10 bars).
The virtual communication LED is usually GREEN. It will turn RED in the event of a breakdown in
communication between the software and this device. If it turns AMBER, this device is either reading the
SIM card or receiving/making a telephone call, under these circumstances the status update will be
suspended temporarily.

Inputs section

This section shows the status of each of the four Inputs (GREEN LED = Input balanced; RED LED = Input
Unbalanced).

Note: Special functions are not used.

Outputs section

This section shows the status of each of the four outputs (GREEN LED = Output in standby; RED LED =
Output activated).

Events section

This section shows the events as they occur (RED LED On).

Send next periodic message on

This section shows the date and time of the next periodic SMS text message (refer to the SMS dialer
page).

Send next periodic report on

This section shows the date and time of the next periodic Contact ID report (refer to the Contact ID
Communicator page).

Clear call queue