1. REMOTE CONTROLLER OUTLET
To be connected with the remote controller, which helps to boost the gain.
Please turn the knob of volume to be maximum before using the remote.
2. BOOST:
The boost ranges from 0dB to 12dB.
3. PHASE:
Phase adjusting switch, the phase ranges from 0°-180° degrees.
4. LPF:
Low pass frequency adjusting knob, the frequency ranges from 30Hz to 150Hz.
5. LEVEL:
Knob for volume adjustment.
6.
LOW LEVEL INPUTS
Low level inputs are the recommended way to introduce the audio signal to the subwoofer if RCA
outputs are present on your head unit or other signal source (such as a sound processor).
7.
+12V :
Anode of power connection terminals. Connect to the anode of car battery.
REM:
Terminal to be connected with Remote cable, wich comes from the source and which
controls the amplifier switching on. Applied voltage must be between 10 and 15 VDC.
GND:
Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a
minimum.
8. FUSE:
Standard automatic fuse, you must use the same power fuse if you need to change it.
9. PROTECTION / POWER INDICATOR
When the amplifier is operating correctly the LED will show as green.
When the amplifier is in protection mode the LED will show as red.
INTRUCTIONS FOR FUNCTIONS AND CONTROLS
BOOST
REFUERZO
LPF
LEVEL
0 dB 12
0° 180° 30 Hz 150 MIN MAX
L R
REMOTE
REMOTO
REMOTO
TIERRA
GND REM +12V
FUSE
FUSIBLE
PROTECCIÓN /
ENCENDIDO
PRO
POW
HIGH INPUT
L
R
+
-
+
-
PHASE
ENTRADA DE ALTA
FASE
LPF
NIVEL
1
2
3
4
5
6
7
8
9
10
11
1. REMOTE CONTROLLER OUTLET
To be connected with the remote controller, which helps to boost the gain.
Please turn the knob of volume to be maximum before using the remote.
2. BOOST:
The boost ranges from 0dB to 12dB.
3. PHASE:
Phase adjusting switch, the phase ranges from 0°-180° degrees.
4. LPF:
Low pass frequency adjusting knob, the frequency ranges from 30Hz to 150Hz.
5. LEVEL:
Knob for volume adjustment.
6.
LOW LEVEL INPUTS
Low level inputs are the recommended way to introduce the audio signal to the subwoofer if RCA
outputs are present on your head unit or other signal source (such as a sound processor).
7.
+12V :
Anode of power connection terminals. Connect to the anode of car battery.
REM:
Terminal to be connected with Remote cable, wich comes from the source and which
controls the amplifier switching on. Applied voltage must be between 10 and 15 VDC.
GND:
Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a
minimum.
8. FUSE:
Standard automatic fuse, you must use the same power fuse if you need to change it.
9. PROTECTION / POWER INDICATOR
When the amplifier is operating correctly the LED will show as green.
When the amplifier is in protection mode the LED will show as red.
INTRUCTIONS FOR FUNCTIONS AND CONTROLS
BOOST
REFUERZO
LPF
LEVEL
0 dB 12
0° 180° 30 Hz 150 MIN MAX
L R
REMOTE
REMOTO
REMOTO
TIERRA
GND REM +12V
FUSE
FUSIBLE
PROTECCIÓN /
ENCENDIDO
PRO
POW
HIGH INPUT
L
R
+
-
+
-
PHASE
ENTRADA DE ALTA
FASE
LPF
NIVEL
1
2
3
4
5
6
7
8
9
10
11
6
