![background image](http://html.mh-extra.com/html/ds-produkte/09700/09700_operating-instructions-manual_2533480014.webp)
EN
14
Use
For safety reasons, the device can only be switched on if all accessories are
fi
tted cor-
rectly and the lid is locked on. Consult the “Inserting / Removing Accessories” chapter for
details of how to correctly insert and remove the accessories.
For good results,
hard foodstu
ff
s
should not be processed in large pieces. If
necessary, chop them into cubes approx. 3 cm in size beforehand.
The device has
overheating protection
and switches o
ff
automatically if it is
overloaded. Allow it to cool down for a few minutes before switching it on again.
Setting Up
PLEASE NOTE!
■
Always place the device on a dry, even and
fi
rm surface. Never place the device on
a soft surface. The ventilation openings on the bottom of the device must not be cov-
ered. Otherwise it could overheat and be damaged.
■
Before foodstu
ff
s are placed in the mixing container, it must be mounted on the motor
unit and the blade insert must be
fi
tted. Otherwise the blade insert will not lock in
place, which may result in a malfunction.
1. Place the motor unit (
6
) on the kitchen unit or another dry and clean work surface.
2. Attach the mixing container (
4
) to the motor unit (see the “Inserting / Removing Ac-
cessories” chapter).
3. Plug the blade insert (
3
) onto the axis (
5
) (see the “Inserting / Removing Accessories”
chapter).
4. Make sure that the switch (
7
) is in the
OFF
position.
5. Completely unwind the mains cable and plug the mains plug into a plug socket.
Chopping Up Food
PLEASE NOTE!
■
Never
fi
ll the shakers with hot food or liquids! The contents must not be hotter than
50°C. There is a danger of burns.
■
Do not over
fi
ll the device! In the case of liquids, do not exceed the maximum
fi
ll lev-
el (
MAX
marking on the mixing container) in order to prevent the mixing container
from over
fl
owing.
■
Do not move the device during operation. Always remove the mains plug from the
plug socket before transporting the device. There is a danger of damage from unfore-
seen events.
■
Use the device for no more than 1 minute without interruption to prevent overheating.
Allow the device to cool down before using it again.
1. Place food in the mixing container (
4
).
2. Attach the lid (
2
) to the mixing container.