![background image](http://html.mh-extra.com/html/ds-produkte/09700/09700_operating-instructions-manual_2533480012.webp)
EN
12
DANGER – Danger of Electric Shock
■
Use and store the device only in closed rooms. Do not operate the device in rooms
with high humidity.
■
Never immerse the motor unit and the connecting cable in water or other liquids and
ensure that these components cannot fall into water or become wet. There is a dan-
ger of electric shock from water.
■
Should the motor unit fall into water, switch o
ff
the power supply immediately. Do not
attempt to pull the motor unit out of the water while it is still connected to the mains
power! Have the motor unit checked in a specialist workshop before using it again.
■
Never touch the motor unit and the connecting cable with wet hands when the motor
unit is connected to the mains power.
WARNING – Danger of Fire
■
Do not use the device in rooms containing easily ignitable or explosive substances.
■
Do not operate the device in the vicinity of combustible material. Do not place any
combustible materials (e.g. cardboard, paper, plastic) on or in the device.
■
Do not insert anything into the ventilation openings of the device and make sure that
these do not become clogged.
■
Do not cover the device during operation in order to prevent it from catching
fi
re.
WARNING – Danger of Injury
■
Keep children and animals away from plastic bags and
fi
lms. There is a danger of
su
ff
ocation.
■
Animals must be kept away from the device and the connecting cable!
■
Make sure that the connecting cable does not present a trip hazard. It should not
hang down from the surface on which the device is placed in order to prevent the
device from being pulled down.
■
Rinse all accessories thoroughly before you
fi
rst use them to remove possible pro-
duction residues. Follow the instructions in the "Cleaning and Storage" chapter to do
this.
NOTICE – Risk of Damage to Material and Property
■
Only connect the device to a properly installed plug socket. The plug socket must be
readily accessible so that the connection to the mains can quickly be isolated. The
mains voltage must match the technical data of the device.
■
Unwind the connecting cable fully before connecting up the device.
■
Remove the mains plug from the plug socket if a fault occurs during operation. Other-
wise always switch o
ff
the device
fi
rst before the mains plug is pulled out of the plug
socket.
■
Always pull the mains plug and never the mains cable when disconnecting the device
from the mains power. Do not pull or carry the device by the mains cable.
■
Always check the device for damage before putting it into operation. The device
should only be used when it is undamaged and in working order! Do not use the
device if it has malfunctioned, fallen or been dropped in water. Have it checked in a
specialist workshop before using it again.