1
2
3
Adjust the alkalinity between 100 and 200
ppm.
Adjust the pH to 7.4.
Adjust the chlorine between 0.1 and 0.5
ppm.
5. INITIAL WATER ADJUSTMENTS
1
2
We recommend to add 1 to 2 kg magnesium chloride (MgCl
2
) or 0.75 - 1.5 kg
of normal salt (NaCl) per m
3
of water. The TDS should be at around 1200. It is
recommended to mix them, for example in a ratio 1:3 (MgCl
2
:NaCl).
Add the magnesium chloride or salt directly to your swimming pool and let the
system run.
In outdoor pools it is necessary to use ACO
®
.
Water adjustments
Adding activator/salt to the water
Attention: Do not calibrate free chlorine with a chlorine
level of less than 0.3 ppm free chlorine!
6. SYSTEM SETTINGS
6.8
6.9
6.6
6.7
6.1
6.3
6.4
6.2
6.5
6.12
6.14
6.13
6.11
6.10
2x
6.9
Sound
6.11
Password:
Protect the user´s menu by activating a password.
To enter your password press a combination of 5 keys and the
system will memorise them. If you forget the password, there is a
“master password”. Ask your installer/provider.
6.3
Language
6.5
Date and Time
6.7
Display brightness
6.12
Hydrolyse-Cell working hours
6.14
System info:
Information about
the software versions and the ID node
7. PADDLE FLOW SWITCH
1
2
3
4
5
6
7
8
Connect as shown in the image
and contact your installer for
activation.
Paddle Flow switch
FL1
2
&
5
Paddle flow switch. Stops
the hydrolysis and the
dosing pumps if there is
no water flow.
8. SUCTION LANCE (pH BOTTLE)
3
4
5
6
Connect the suction lance. The installer/provider
should be contacted to activate the sensor.
pH-Minus bottle
level
TANK
4
&
5
9. HYDROLYSIS
9.1
9.3
9.2
9.1
Hydrolysis:
Programming
of hydrolysis functions
9.2
Level:
Hydrolysis - Desired disinfection
production (Always 100%).
9.3
Mode:
If the device has Free Chlorine
and redox probes, choose the parameter
that controls the cell’s chlorine generation.
3
EN
Summary of Contents for DA-GEN
Page 2: ......
