Page 8
For technical questions, please call 1-888-866-5797.
Item 56599
Pull Across Surface Placement
1. Tie one end of the included 25’ rope to the loop
on the Debris Strainer. Secure with a knot.
Pull rope
through
loop
Debris Strainer
2. After positioning it, make sure pump sits fully upright.
3. Secure power cord and hose being careful not
to pinch or damage them. Place in area where
they will not be damaged or stepped on.
DANGER! Do not use an extension cord with this
pump. Keep plug dry and connected to a GFCI
protected outlet secured away from water.
4. Be sure power cord reaches outlet
without any strain to cord.
5. Secure the end of the rope outside the
water collection area for easy access.
6. Place pump in the lowest spot on surface where
water accumulates. Be sure pump sits fully upright.
7. To position pump on a surface you cannot walk
on, hold rope, walk around parameter and gently
pull pump with rope. Be careful to guide hose
and power cord as you position the pump.
8. Once the pump is in the desired location
secure rope for easy access.
a. Secure power cord and hose being
careful not to pinch or damage them.
b. Place in area where they will not be
stepped on or present a tripping hazard.
c. Be sure power cord reaches outlet
without strain on the cord.
9. To remove Pump, disconnect power cord. Pull rope
and guide the Pump towards you for removal.
