background image

Page 11

For technical questions, please call 1-888-866-5797.

Item 56599 
        

Parts List and Diagram

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM 
IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER OR DISTRIBUTOR 
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS 
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE 
ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY 
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND 
LICENSED TECHNICIANS, AND NOT BY THE BUYER.  THE BUYER ASSUMES ALL RISK AND LIABILITY 
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS 
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Part

Description

Qty.

1

Shaft

1

2

Impeller

1

3

Diffuser

1

4

Screw

4

5

Base and Inlet Screen

1

6

Screw

3

7

Debris Strainer

1

Part

Description

Qty.

8

Volute

1

9

Gasket

1

10

Pump Housing

1

11

Power Cord

1

12

Rope

1

13

Check Valve

1

1

2

3

4

5

6

7

9

8

11

10

12

13

Record Product’s Serial Number Here: 
Note:

 If product has no serial number, record month and year of purchase instead.

Note:

 Some parts are listed and shown for illustration purposes only, 

and are not available individually as replacement parts.

Summary of Contents for 56599













Reviews: