SECTION 3
GETTING STARTED
PAGE 66
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
C onfiguring and C ontrolling your W ireles s
R adios
For instructions on configuring and controlling your wireless radios, including the optional
WWAN radio and optional GPS receiver, refer to Section 4,
. You will also find
instructions for connecting to a cabled LAN.
Ins talling a Mic ro S D/S DHC C ard
A micro SD/SDHC card can provide up to 32GB of additional data storage. The socket for this
card is located inside the computer and is accessed by removing the cooling register/cover at
the back of the computer. For instructions on how to remove the rear cover and install the card,
refer to
Installing a Micro SD or SDHC Card
Ins talling the O ptional D-R ings
Follow the procedure in Table 5 to install a D-ring to each of the four accessory mounting points.
Table 5. Installing the D-Rings
STEP
ACTION
COMMENTS
1.
Remove both batteries to access the
accessory mount points.
NOTE:
The accessory mount points are
located on the top and bottom panels of
the X7 (see Figure 7).
2.
Using a pointed object such as a
dentist probe or large pin, slide out
the locking bar on each D-Ring until it
clears the center opening, as shown
in the image to the right.
3.
Insert a D-Ring onto each accessory
mount point and push the locking bar
in all the way.
4.
Replace both batteries.
