SECTION 2
LEARNING ABOUT YOUR ARMOR X7
PAGE 31
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
Dis play
The X7 display is a high-brightness, high-contrast LCD display with anti-glare filtering that
ensures your screen can be clearly viewed even in bright sunlight. A replaceable screen
protector is attached at the factory to reduce glare and protect the touch screen surface.
The X7 is equipped with both an active pen (digitizer) screen and a touch screen. The pen
digitizer screen permits precise data entry and accurate handwriting conversion while the touch
screen provides quick and accurate operation using just a fingertip. A passive stylus (not
supplied) will provide even more precision with the touch screen. You can choose to operate
with both screens (Dual Mode) or with only one screen (Touch Only or Pen Only). Both screens
have the same clear, crisp viewing quality in any lighting situation.
In Dual Mode, the touch screen is enabled. However, if an active pen is detected with ½” of the
screen, the touch interface is turned off and active pen takes over. Switching between the two
screens is automatic and instantaneous.
C ontrols
There are 6 push buttons and a fingerprint sensor on two control panels located on either side
of the X7 display (Figure 2). Each button has a built-in LED that varies in intensity with the
screen brightness. The following paragraphs describe the purpose of each control.
Figure 2. X7 Control Panels
FINGERPRINT
SENSOR
SECURITY ATTENTION
SEQUENCE (SAS)
BUTTON
POWER
BUTTON
FUNCTION (Fn)
BUTTON
PROGRAMMABLE
BUTTONS (PBs)
