21/25
11. FIXING AND INSTALLATION DETAILS
Following shows the maximum dimensions and mounting positions of the panel.
The following are general recommendation:
•
Install the unit in an easy to access location so that users can avoid unnatural postures and have good visibility of the
display.
•
Leave 100mm or 4 inches around the unit of space to facilitate cabling and maintenance.
•
Do not install the unit in dangerous or excessively aggressive environments with high levels of vibration or in the
vicinity of flammable substances.
•
Always use the four fixing points as indicated in the diagram.
•
For installation, use the holes shown in the previous paragraph.
11.1
UN-PACKING
Once the installation point has been identified, you
can unpack the
VIP5 Pro Atex
from its shipping box.
Check that the unit has not been subject to any
damage during transport. Dispose of the packaging
in an appropriate manner, following local waste
regulations.
11.2
INSTALLATION
The
VIP5 Pro Atex
must be secured physically to a
mounting location and cabled to all the required
components of the lubrication system.
Fig. 13
Vip5
Pro Atex
