3
Application
Machine tools
Machines for cutting and bending plate
Steelworks
The units are supplied without accessories. The installer is responsible for providing the accessories needed for safe and
correct operation (condensate separator, filters, pressure gauges, by-pass, etc…).
3. MACHINE IDENTIFICATION
There is a plate on the side of the unit that displays the product code, the power supply voltages and the basic characteristics.
4. TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Pumping system
External pump
Maximum number of modules
8
Maximum Oil inlet pressure
2,5:1 in relation with air inlet pressure
Air inlet pressure
4bar ÷ 7bar [87psi ÷ 101,5psi]
Maximum air consumption at the outlet
~50Nl/min (per module)
Air inlet pipe
Ø6mm
Oil inlet pipe
Ø6mm
Air outlet pipe
Ø6mm
Oil outlet pipe
Ø3mm
Oil flow rate per element (with compensation valve)
0 ÷ 2cc/min (oil 10cSt ÷ 32 cSt)
0 ÷ 0,5cc/min (oil 32cSt ÷ 100 cSt)
Lubricant
10cSt ÷ 100cSt
Pressure switch calibration
6bar [87psi]
Element solenoid valve power supply
24Vdc
Operating temperature
+5°C ÷ +50°C
Storage temperature
-10°C ÷ +80°C
Max relative humidity without operating condensate
90%
Sound level pressure
< 70 db (A)
5. MACHINE COMPONENTS
MODULAR ELEMENT
Solenoid valve
(“
-
i
” version only)
Pressure gauge
(optional)
Push-in pipe Ø6 air
outlet
Air regulation
Oil regulation
Compensation valve
(“PRO” version only)
Push-in pipe Ø3 oil
outlet
