11
15. GUIDELINES FOR USE
Compliance with the essential safety requirements and the provisions specified in the machine directive was checked by filling
out prepared check lists that are contained in the
technical file
.
Two types of lists were used:
Risk assessment (UNI EN ISO 14121-1).
Compliance with the essential safety requirements Machine Directive –EC 06/42).
The risks that were not completely eliminated, but considered acceptable, are specified below:
During maintenance, sprays of oil at low pressure are possible (for this purpose, suitable PPE must be worn during
maintenance activities).
Unsuitable postures: The correct dimensions and installation methods are described in this manual.
Use of unsuitable lubricant: The specifications of the lubricant are indicated both on the unit as well as in this
User and
maintenance manual
(
in the case of doubt, contact the Dropsa S.p.A technical office
).
FLUIDS THAT ARE NOT PERMITTED
FLUIDS
RISKS
Lubricants with abrasive additives.
Wear of internal components.
Lubricants with silicone additives.
Seizure.
Petrol – solvents – inflammable liquids.
Fire – explosion – damage to the gaskets.
Corrosive products.
Corrosion - damage to people.
Water.
Unit oxidation.
Food substances.
They would be contaminated.
