14
3.3.2.3 Warnings to be heeded in the Installation and Operation Phases
In the operation and setup phases, the warnings in this paragraph must be heeded.
Carry out
transport / positioning / securing
of the machine using suitable means. The
machine has
limited dimensions
and a
weight
of
15 kg
or
18 kg
, depending on whether it is
fitted respectively with a 5 kg or 10 kg grease reservoir. Always handle the
MACHINE
with the
reservoir completely empty.
Always ensure the correct and solid
connection of the pumping elements
with the grease
distribution system downstream of the machine (the selection and installation of which is the
customer’s responsibility) before starting it.
Always load the grease using the
filling nozzle
SPECIFICALLY PROVIDED ON THE MACHINE
, and the
relative
grease filter
fitted on the nozzle.
Do not use the machine with pumping element or elements removed
. Remove them only
with the machine disconnected from the electrical power supply.
Do not remove the
connections and/or the piping of the grease distribution system
downstream of the machine are removed with the system still under pressure. Even with the
machine already stopped, it can stay under pressure. On the grease distribution system
downstream of the
MACHINE
, always install a
detection / reading system of the relative
pressure point. Always ensure the absence of pressure before
removing the connections
and/or piping of the grease distribution system downstream of the
MACHINE
.
Always install a
grease distribution system
downstream of the
MACHINE
(the selection and
installation of which is the responsibility of the customer), including the piping and the
connections,
suitable for managing the maximum pressures
that develop in it due to the
pumping of grease in it by the
MACHINE
.
Never operate with open flames near the machine
.
Never open the upper cover of the
MACHINE
, which is fitted with a lead seal, at the penalty of
voiding the warranty.
For these operations, assign only
specialised personnel trained
on the installation and
operation procedures.
Start the 989
V
2 only if
all the safety protection devices are in proper working order
.
Do not remove
, for any reason whatsoever, the installed safety devices and guards.
Adhere to all the
safety and danger signs
AFFIXED ON THE MACHINE
.
Ensure that all the
safety and danger signs
AFFIXED ON THE MACHINE
are always legible.
Wear all the
required PPE
.
Integrate or diversify this PPE
depending on the explicit
requirements of the MSDS relative to the
grease being used
.
Always ensure that
no foreign objects are present
on the
M
ACHINE
.
Carry out
regular maintenance
in accordance with what is established in the specific chapter.
Do not operate
in correspondence to the 989
V
2 without having entirely and carefully read
this manual.
Activate any movement of the 989
V
2
only after having ensured the absence of other
personnel in the dangerous area
.
