13
3.3.2. Installation and operation
3.3.2.1. Residual risks present in the Installation and Operation Phases
In the operation and setup phases, risks are present connected to:
use of the 989
V
2 by unqualified, untrained, uninformed or incorrectly equipped personnel;
contact with chemical agents
, namely, the grease being used by the
MACHINE
;
crushing / impact to the hands or feet due to
falling during transport / positioning / securing
of the
MACHINE
in its installation point, or
during operation
due to incorrect securing;
projection of grease from the reservoir bleed valve in the event of
excessive filling
;
projection of non-pressurised grease in the event of
lack of / incorrect connection of the
pumping elements
with the grease distribution system downstream of the machine (the
selection and installation of which is the customer’s responsibility);
projection of grease under pressure due to
incorrect connection with the grease distribution
system
downstream of the
MACHINE
(the selection and installation of which is the customer’s
responsibility) or due to the
breakage of connections or piping of the grease distribution
system itself
;
possible breakage and projection of components or parts of them or materials / foreign
objects present in the
GREASE LOADED IN THE MACHINE
'
S RESERVOIR
, in the event in which it is
loaded in a manner other than that required
, in other words,
without using the filling nozzle
specifically provided on the machine and the relative
grease filter
fitted on the nozzle;
serious breakage /
fault with the
MACHINE
or its components, with projection of the same or
parts of them or parts being processed.
possible impact / crushing with the pumping elements handling system in the event of use of
the
MACHINE
with pumping element or elements removed
;
projection of fluid under pressure if the
connections and/or the piping of the grease
distribution system
downstream of the machine are removed with the system still under
pressure, even with the machine already stopped.
ignition of flammable materials due to incorrect use of the
MACHINE
, namely near open
flames;
contact with live electrical parts.
3.3.2.2. Required Personal Protection Equipment
