11
3. Safety
3.1. Materials present on the
MACHINE
None of the materials used for the constructions of the
MACHINE
components
are dangerous for
the personnel in charge of its operation (during all life phases of the
MACHINE
itself). Specifically,
the materials used for the construction of the
MACHINE
are primarily:
iron derivatives;
plastic derivatives;
copper derivatives;
During operation, the
MACHINE
uses specific products for the production purpose, namely
lubricants contained in its reservoir to carry out its operations. The lubricants permitted by the
manufacturer DropsA S.p.A. can in and of themselves bear phrases of risk on their MSDS (material
safety data sheet) even related to flammability, irritability, harmfulness to the health and toxicity
of the grease. In this respect, DropsA S.p.A. requires the use of
suitable PPE
, namely gloves, eye
protection and shoes, while carrying out the various possible operations on the
MACHINE
itself. In
any case,
this PPE must be integrated or diversified
depending on the explicit requirements of the
MSDS relative to the grease being used. On the other hand, lubricants with the characteristics
indicated in the following table shown in the paragraph on intended use
are prohibited
.
The
MACHINE
does not produce gases, residues or powders, fogs, fumes or vapours during
operation.
3.2. Devices and Solutions for Protection
The construction devices and solutions described below have been adopted for the
M
ACHINE
.
Fixed guards in metallic and plastic material that act as a shield for the motion drive parts.
3.3. Warning of residual risks
In order to prevent any dangerous condition for personnel or damage to the
MACHINE
caused by
residual risks, in other words, those risks that remain despite all the devices adopted, or from less
evident potential risks, the
M
ANUFACTURER
urges operators, maintenance personnel and all
personnel in charge of the
M
ACHINE
to strictly adhere to the warnings indicated on the following
pages.
