Drive DeVilbiss Healthcare LPHWCSP19SIL, Instructions For Use Manual

Page: 5 / 16

Phantom Aluminium Wheelchair (2022-01 rev2) Page 5 of 16
Footrest adjustment
1
3
2
To fit the footrests, align approximately 45º
outwards, push down firmly into the frame (1)
then rotate inwards (2) until they lock into place.
Pull the handle and rotate to release.
For optimum comfort it is important to attain
the correct leg position. To change the
footrest height, unscrew the small hand wheel
on the side, reposition and screw until secure.
Attaching
the footrest
!
Common misuse
Do not stand on the footrests. Overloading can damage the
product and cause harm to the occupant.
Folding back mechanism
2
1
PADDLE
To fold the backrest, push the black paddle
towards the back post with your thumb (1)
whilst pulling the handle down (2) as shown
in the
folding the backrest
image. Repeat this
operation for the other handle.
To put the backrest back into position, lift
both handles together and the folding
mechanism will lock back automatically.
Do not push down on the handles to raise
the front of the wheelchair, as this could
result in damage to the wheelchair. To mount
kerbs and steps, reconnect the backrest and
use the stepper tube as described in the
steep terrain, kerbs and steps section.
Folding the
backrest
!
Common misuse
The paddle is intended to be pushed. Do not pull the paddle to
fold the backrest.