Drive DeVilbiss Healthcare LPHWCSP19SIL, Instructions For Use Manual

Page: 9 / 16

Page 9 of 16 Phantom Aluminium Wheelchair (2022-01 rev2)
Disassembly and storage
This wheelchair has a number of quick release components and the
wheelchair frame is easily foldable. This facilitates a light carry weight and
minimises storage space required. To disassemble for storage, transport or
maintenance, follow the steps below. To reassemble components, reverse
these instructions.
1. Quick release wheels
To remove the rear wheels, push the
button in the centre of the wheel hub,
(shown on the
Quick release button
diagram), and slide the wheel and axle
from the frame.
To reattach, push both parts into the
frame until the wheel is secure.
2. Half Folding Back
Follow the previous instructions to fold the back.
3. Footrests
Follow the previous instructions to remove or swing out the footrests.
4. Folding the wheelchair
Remove the seat and back cushions. Then grab the centre of the front and
rear edges of the seat sling. Pull upwards on the seat sling and the
wheelchair should naturally fold up.
Note: The wheelchair may be folded and stored in a motor vehicle.
The wheelchair should be stored in a dry environment, away from direct
sunlight. If wheels are attached, store with the parking brakes on.
Quick release
button