drive.web automation
Warning!
You are entirely responsible for the configuration or use of any
drive.web
product. By configuring
or using these products you agree to indemnify and hold harmless Bardac Corporation, its employees, directors,
officers, distributors, and resellers against the consequences of your configuration or use of the products.
Warning!
Information in this manual is subject to change without notice. You are responsible for verifying the
proper operation of your
smarty
. Special care must be taken after loading new firmware or installing new options.
Warning!
Avoid permanent damage to your
smarty
, never exceed any
min
or
max
values. Do not connect
any
smarty
terminal to mains circuits. See page 5 for IO ratings.
lwIP is incorporated into
smarty
firmware. lwIP Copyright (c) 2001-2004 Swedish Institute of Computer Science. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Product Identification -
smarty
Cassette Models
smarty
is a programmable device using
drive.web
distributed
control over Ethernet for industrial process automation. To
program and use
smarty
you must get the
savvy
software
tools from
www.driveweb.com
. See pages 6-9.
Find
smarty
firmware version. Use
savvy
,
Get Detailed
Info
from
smarty
contextual menu. Page 6.
dw240
Universal automation controller.
dw241
Basic automation controller for carrier
C1
only.
dw244
for
P2
industrial vector drive.
dw248
for
E3
open-loop vector drive.
dw249
Universal automation controller for
CANopen
server devices.
These
smarty
cassette modules install into terminal block carriers.
Warning!
Avoid permanent damage to
smarty
. Disconnect all
power sources prior to inserting or removing the cassette.
Product Identification - Part Number Extensions
Model number
dw24x
is appended with a two or six character extension.
Standard Builds
A, B, C,
and
D
- Software Options
A
=04 and 26,
B
adds 05 and 25,
C
adds 06 and 39,
D
adds 10 and 29.
04 ModbusTCP/IP
- Slave/server.
See page 12.
05 Process Control
- Recommended for most applications.
06 Winder Control
- Diameter Calc., Taper Tension, Torque Comp.
10 Math
- With advanced math functions.
25 EIP/PCCC
- Slave/server. See page 12.
26
savvyPanel
- Operator station interface. See pages 8, 9.
29 Solar
-
Calculates sun position azimuth and zenith.
39 Precision Motion
-
With event, length, position, shaft-lock,
indexing, motion control, cam profile, and more. Page 12.
smarty
HG503894Beta13
www.driveweb.com
Page
#
/12
2
Typical Example;
dw240-DM-C4CD
Standard Build, see below.
ModbusRTU Type, see page 12.
Carrier, page 3.
Terminal Type; C=Cage-
Spring, S=Screw-Clamp,
P=Pluggable Screw-Clamp
Mounting Type; D=DINrail,
F=Foot, A=Spacer, 4=NEMA4X
