Drive Proof DP-210, Instruction Manual

Page: 6 / 24

6
3
Front Glass
DVR Body
Double sided
Adhesive tape
Rear view Mirror
Keep Horizontal
Tinting section
Outdoor
Indoor
- DO NOT use any other cables than the included
power cable.
- For vehicles with excessive window tinting, the
recorded images may appear dark.
- Do not install the Black Box Car Camera in such a
manner as to have reflective feedback emitting
from the IR LEDs reflecting off of the rear view
mirror.
- Always install this device so that it is level as shown
in the figure above. Otherwise, you cannot obtain
normally recorded images.
- If installed at the center of the glass window in
the front of the rear view mirror, optimal record-
ed images can be obtained.
2 CH DRIVING VIDEO RECORDER
Installing the recorder in your Vehicle
Prior to installation, check the following :
- After installation, start the vehicle. Then, the LED on the POWER will light up, which indicates nor-
mally completed installation.
- If the LED on the POWER fails to light up, check the cable connections and remove dust or impurities
from the cigarette socket.
Once wiring and installation have been completed, check the following: