Drive Proof DP-210, Instruction Manual

Page: 9 / 24

9
5
2 CH DRIVING VIDEO RECORDER
Preparations for use & operation
- Please use only recommended SD card. Manufacturer is not responsible for use of non-recom-
mended SD Card.
- To remove the SD card, first turn off the vehicle engine, and check that the POWER LED light is off
(not more than 10 sec. required). Then, remove the SD card. Please wait for audible tone and all
indicators lights to be off prior to removing the SD Card. Failure to do so may result in loss of data
or damaged SD Card.
- Incorrectly inserting SD Card may cause malfunction. Do not subject card to impurities as
data loss may occur.
- If the SD card has not been formatted in 1 week (168 hours), the “Format” text will show when
the viewer is executed. The “Format” text will also show on the monitor when the SD card is
inserted in the camera. Please format the SD card at viewer setup.
* Please use new 64GB SD card, to insure proper operation with the DP-210.
- The DP-210 must be formatted with FAT32 file system.
- When SD card is formatted on PC in advance, normally, it is formatted with FAT32 system up to
32GB SD card. But, 64GB SD card is formatted with exFAT system unlike 32GB SD card.
- If the SD card has other formatting, the SD card is auto-formatted on PC and the setting value will
be initialized and recorded data will be deleted.
Before using the SD card, check the followings :
These are the precautions for 64GB SD card use. Please note below.