Oximeter Series
PULSE OXIMETER INSTRUCTION
MANUAL
4
Do not use the oximeter in an MRI or CT environment.
Do not open the equipment housings; electric shock hazard
may exist. All servicing and future upgrades must be carried
out by the personnel trained and authorized by our company
only.
The pulse oximeter is specified for use by medical
professionals only.
Prolonged use of the probe/sensor or the patient’s condition
may require changing the sensor site periodically. Change the
sensor site and check skin integrity, circulatory status, and
correct alignment at least every 4 hours. Prolonged use may
cause blisters, skin deterioration, and discomfort.
When connecting this oximeter to any instrument, verify
proper operation before clinical use. Refer to the instrument’s
user manual for full instructions. The equipment connected to
the pulse oximeter’s data interface must be certified
according to the respective IEC standards, i.e., IEC950 for
data processing equipment or IEC 601-1 for medical electrical
equipment. All combinations of equipment must be in
compliance with IEC601-1-1 systems requirements.
Sensor malfunction may cause inaccurate data possibly
resulting in patient injury or death, so pay close attention to
the sensor and inspect it often.
The physiological data and alarm messages displayed on the
equipment are for reference only and cannot be directly used
