Page 8 of 12
Ultra Lightweight Aluminium Wheelchair (LAWC_IFU 2020-11 rev1)
disassembly and storage
This wheelchair has a number of quick release components and the
wheelchair frame is easily foldable. This facilitates a light carry weight and
minimises storage space required. To disassemble for storage, transport or
maintenance, follow the steps below. To reassemble components, reverse
these instructions.
1.
Quick release wheel
On the self propel model, the rear wheels
can be removed. To remove the rear wheels,
push the button in the centre of the wheel
hub, (shown on the
Quick release button
diagram in grey), and slide the wheel from
its axle.
2.
Half Folding Back
Follow the previous instructions to fold the back.
3. Footrests
Follow the previous instructions to remove or swing out the footrests.
4.
Folding the wheelchair
Grab the centre of the front and rear edges of the seat sling.
Pull upwards on the seat sling and the wheelchair should naturally fold up.
Note: The wheelchair may be folded and stored in a motor vehicle.
The wheelchair should be stored in a dry environment, away from direct
sunlight.
Quick release
button
