background image

Ultra Lightweight Aluminium Wheelchair (LAWC_IFU 2020-11 rev1)

Page 4 of 12

footrest adjustment

 

1

2

To fit the footrests, place the brackets onto the 
pins either side of the wheelchair frame (1) and 
rotate inwards (2) until they lock into place. Pull 
the tabs inwards to release.

For optimum comfort it is important to attain 
the correct leg position. The footrests have 
been designed so they can be extended into 
one of 5 fixed lengths.
To change the height, unscrew the bolt on the 
silver tubing with a 4mm hex key. Adjust the 
footrest as required, then tighten to secure.

Attaching the footrest

!

Common misuse

Do not stand on the footrests. Overloading can damage the 
product and cause harm to the occupant.

folding back mechanism

2

1

PADDLE

 

To fold the backrest, push the black paddle 
towards the back post with your thumb (1) 
whilst pulling the handle down (2) as shown 
in the 

folding the backrest

 image. Repeat this 

operation for the other handle. 

To put the backrest back into position, lift 
both handles together and the folding 
mechanism will lock back automatically.

Do not push down on the handles to raise 
the front of the wheelchair, as this could 
result in damage to the wheelchair. To mount 
kerbs and steps, reconnect the backrest and 
use the stepper tube as described in the 

steep terrain, kerbs and steps

 section.

Folding the 

backrest

!

Common misuse

The paddle is intended to be pushed. Do not pull the paddle to 
fold the backrest.

Summary of Contents for LAWC007A













Reviews: