3
CRUV INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
Product overview
OM-2007
OM-2006
OVERVIEW
Supply water connection
Float rod
Float ball
OM-7396
Humidifi ers using tap or softened water control water levels electronically
using a three-rod probe. The controller responds with the above actions
when the water level reaches each rod.
VLC-OM-030
Fill valve opens when water level is below this probe.
Low-water cutoff. Power to heaters is cut if water
level drops below this probe.
Fill valve closes when water level rises to this probe.
mc_030910_1335
Humidifi ers using RO/DI water control water levels using a fl oat valve
and low-water cutoff switch.
mc_052710_1644
DISPERSION OPTIONS
Dispersion options shown on this page are available for CRUV humidifi ers.
See the installation instructions beginning on Page 6.
FIGURE 3-1: ULTRA-SORB DISPERSION
FIGURE 3-2: WATER LEVEL CONTROL FOR TAP/SOFTENED
WATER HUMIDIFIER
FIGURE 3-3: RAPID-SORB DISPERSION
FIGURE 3-5: SINGLE OR MULTIPLE TUBE DISPERSION
FIGURE 3-4: WATER LEVEL CONTROL FOR RO/DI WATER
OPTION HUMIDIFIER
OM-7475
