is in its “OFF” position, the Battery Pack (27) is removed from the Cordless Drill,
and the Charger (41) is unplugged from its electrical outlet prior to making any
adjustments to the tool. (See Figure A below, and Figure B, next page.)
2.
Chuck (7): Accepts up to 3/8”
shank diameter Drill Bits (not included). To install
a Drill Bit, with the Cordless Drill pointed away from your body, hold the Chuck
Sleeve firmly in place and turn the Chuck
clockwise. Insert the shank of a Drill
Bit all the way into the Chuck. While holding the Chuck Sleeve in place, turn the
Chuck
counterclockwise to lock the Drill Bit in place. (See Figure A.)
SKU 92383 For technical questions, please call 1-800-444-3353 PAGE 7
3.
Power Switch (20): The Power Switch is operated
manually simply by squeezing
the Power Switch to turn on the Cordless Drill and releasing pressure on the Power
Switch to turn off the Cordless Drill. (See Figure A.)
4.
Forward/Lock/Reverse Lever: The Forward/Lock/Reverse Lever allows you to
change the rotational direction of the Cordless Drill and
also to lock the Power
Switch (20) in its “OFF” position. To change the rotational direction, make sure
the Cordless Drill is at a complete stop. While holding the Cordless Drill in your
hand, move the Lever to the
left for a clockwise rotation. For a counterclockwise
rotation, move the Lever to the
right. To lock the Power Switch in its “OFF” position,
move the Lever midway between the left and right settings. (See Figure A.)
FIGURE A
POWER SWITCH
(20)
FORWARD/LOCK/REVERSE
SWITCH
BATTERY PACK
(27)
CHUCK
(7)
CHUCK SLEEVE
AIR VENT
CARRYING STRAP
(39)
LEFT & RIGHT GRIPS
(4, 21)
LEFT & RIGHT HEAD GRIPS
(5, 13)
