User manual
ELECTRIC IN BUILT OVEN | EUROPA 60 ELÉCTRICO
18
The panels of the adjacent cabinets must be made of heat resistant material.
Particularly, the cabinets with an outer plate should be mounted with glue that can
withstand temperatures up to 100
℃
.
According to current safety standards, contact with the electrical parts of the oven
should not be possible once it has been installed. All parts, which make possible the
safe operation of equipment, should be removed only with the aid of a tool.
To attach the oven to the cabinet must be opened the oven door and fasten
inserting 4 screws 4 holes located in the frame edge.
Electric connection.
Furnaces equipped with a power cord three-poles are designed to operate
with alternating current.
The cable for the equipment ground color is yellow-green.
Install a power cable
Open the terminal board:
• Using a screwdriver, press the
latches on the side tabs of the
terminal cover board;
• Unscrew the lock, pull open the
panel cover. To install the cable,
proceed as follows:
• Remove the clamp screw and the
three contact screws LN-
• Attach the wires under the screw heads using the following color scheme: Blue (N)
Brown (L) Green-Yellow
45 mm
．
560
mm
．
