Dresser Series D Installation Supplement
© 2019 Natural Gas Solutions North America, LLC
Page 20 of 24
9.1
Pulse Output Allocation Settings and Testing
In the Dresser MeterWare software, the Corrector pulse output allocation is configured on the
Volume
Configuration
screen (refer to Figure 35).
For more information about the settings on this screen, refer to the
Dresser MeterWare Software Manual
.
Note:
Some customers have their meter configured by the Factory. Verify your company
policy before making any configuration changes.
Figure 35: Pulse Output Allocation fields on the Volume Configuration screen
To send test pulses to verify the pulse outputs are connected correctly, use the MeterWare software
Test
Pulse Outputs
function on the
Advanced
screen (refer to Figure 36). The
Test Pulse Outputs
feature
allows you to specify the number of pulses to test pulse outputs 1, 2, and 3. The pulse width of the
Compensated and Non-Compensated Volume test pulses is the pulse width specified on the
Volume
Configuration
screen.
For more information about configuring and testing pulse outputs, refer to the
Dresser MeterWare
Software Manual
.
