© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
Installation steps
QUATRA LUX 32x46 34x46 shower enclosure manual Ver 3 Rev 4a 112019
7
©2019 DreamLine. All Rights Reserved
Take extra care during the
installation when setting the panel
glass directly onto the threshold.
NOTE:
Make sure the
Glass Panels
are plumb.
Fig 1
Fig 2
outside
W2
W2
W1
W1
NOTE:
Enclosure measurements should be taken
at the bottom of the opening at the threshold
and plumb lines drawn up the walls from there.
Measured from the finished corner to the
outside of the glass
Glass Box Code:
SHEN-GL1311-324610
SHEN-GL1311-344610
46-3/8”
46-3/8”
32-3/8”
34-3/8”
W1
W2
TOP
outside
outside
8-3/4”
7-7/8”
!
1.
Assemble the
Wall Brackets (#14)
onto the
Hinge
Panel Glass (#01)
and the
Return Panel Glass (#03)
using at least one gasket per side to protect the glass
surface.
NOTE
that the top notch on the hinge panel glass is closer
to the top of the glass and the Bottom bracket hole is at
the bottom.
(Fig 1)
2.
Draw a plumb line on the wall (starting at the
threshold) according to the Shower Enclosure
model size per the table below:
Place the assembled
Hinge Panel Glass (#01)
and
Return Panel Glass (#03)
onto the shower base,
aligned with the model dimension marks on the
wall and level the glass vertically.
(Fig 2)
