Dreambox Two UltraHD User Manual Download

Page: 59 / 67

Chapter 8

Updating the software

8.1 Backing up your setting

Before installing newer software on your Dreambox you should backup your settings, otherwise they will be

lost.

1. Press the

Menu-Button

to open the main OSD menu.

2. With the

Navigation-Buttons ( ▲▼)

choose the option “Setup” and press the

OK-Button.

With the Navigation-Buttons ( ▲▼) choose the option “Software management” and press the

OK-Button

4. With the

Navigation-Buttons ( ▲▼)

choose the option “Backup system settings” and press the

OK-Button.

8.2 Restore your settings

1. Press the

Menu-Button

to open the main OSD menu.

2. With the

Navigation-Buttons ( ▲▼)

choose the option “Setup” and press the

OK-Button.

3. With the

Navigation-Buttons ( ▲▼)

choose the option “Software management” and press the

OK-Button.

4. With the

Navigation-Buttons ( ▲▼)

choose the option “Restore system settings” and press the

OK-Button.

Summary of Contents for Two UltraHD




































































Search results

Summary of Contents for Two UltraHD

Reviews:

Related manuals for Two UltraHD

Brands by name

Popular brands

Dreambox Two UltraHD, User Manual

Search results

Summary of Contents for Two UltraHD

Reviews:

Related manuals for Two UltraHD

Brands by name

Popular brands