Dreambox Two UltraHD User Manual Download

Page: 35 / 67

2 9

Chapter 5

Setup

5.1 Language

1. If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu.

2. With the

Navigation-Buttons ( ▲▼)

choose the option “Setup” and press the

OK-Button

3. With the

Navigation-Buttons ( ▲▼)

choose the option “System” and press the

OK-Button

4. With the

Navigation-Buttons ( ▲▼)

choose the option “Language” and press the

OK-Button

5. With the

Navigation-Buttons ( ▲▼)

choose your desired language and press the

OK-Button

order to activate.

5.2 Customize

1. Press the Menu-Button to open the main OSD menu.

2. With the

Navigation-Buttons ( ▲▼)

choose the option “Setup” and press the

OK-Button

3. With the

Navigation-Buttons ( ▲▼)

choose the option “System” and press the

OK-Button

4. With the

Navigation-Buttons ( ▲▼)

choose the option “Customize” and press the

OK-Button

Setup modes

There are three different user modes: Simple, Intermediate and Expert.

This gives you the possibility to set the level of options to your needs. Intermediate is the default setting.
We will not explain the expert mode in detail in this manual.

Summary of Contents for Two UltraHD




































































Search results

Summary of Contents for Two UltraHD

Reviews:

Related manuals for Two UltraHD

Brands by name

Popular brands

Dreambox Two UltraHD, User Manual

Search results

Summary of Contents for Two UltraHD

Reviews:

Related manuals for Two UltraHD

Brands by name

Popular brands