38
6. With the
Navigation-Buttons (
▲▼)
choose the option “DVB-S2 Tuner” and press the
OK-Button.
7. With the
Navigation-Buttons ( ▲▼)
choose the option “Mode”.
8. With the
Navigation-Buttons (◄►)
choose the option “Single”.
9. With the
Navigation-Buttons ( ▲▼)
choose the option“Satellite”.
10. With the
Navigation-Buttons (◄►)
choose the desired Satellite.
11. Press the
OK-Button
to save this settings.
You are taken back to the “Choose tuner” menu.
If you have trouble with “Tune failed” messages please set the “Send DiSEqC only on sattelite
change” to “yes”.
6.1.2 Two satellites via Toneburst A/B
Use this type of configuration if you want to receive two satellites from one LNB each. It does not matter
If you use one or two dishes to achieve this. Connect the two coax cables from the two LNBs to a so-called
Toneburst switch and connect the coax cable from the Toneburst switch to your Dreambox.
Two satellites via Toneburst
Follow these steps:
1. Press the
Menu-Button
to open the main OSD menu.
2. With the
Navigation-Buttons ( ▲▼)
choose the option “Setup” and press the
OK-Button.
3. With the
Navigation-Buttons ( ▲▼)
choose the option “Services and Recordings” and press the
OK-Button
.
4. With the
Navigation-Buttons ( ▲▼)
choose the option “Service Searching” and press the
OK-
Button.
5. With the
Navigation-Buttons ( ▲▼)
choose the option “Tuner configuration” and press the
OK-
Button.
