39
6. With the
Navigation-Buttons (
▲▼)
choose the option “DVB-S2 Tuner” and press the
OK-Button
.
7. With the
Navigation-Buttons ( ▲▼)
choose the option “Mode”.
8. With the
Navigation-Buttons (◄►)
choose the option “Toneburst A/B”.
9. With the
Navigation-Buttons ( ▲▼)
choose the option “Port A”.
10. With the
Navigation-Buttons (◄►)
choose the desired Satellite.
11. With the
Navigation-Buttons ( ▲▼)
choose the option “Port B”.
12. With the
Navigation-Buttons (◄►)
choose the desired Satellite.
13. Press the
OK-Button
to save this settings.
Make sure you know which satellite is connected to which input on the Toneburst switch. If you do not findany services in
the transponder scan later, exchange the two satellites in this list and try again.
6.1.3 Two satellites via DiSEqC A/B
Use this type of configuration if you want to receive two satellites from one Twin Universal or Quad Universal
LNB. It does not matter if you use one or two dishes to achieve this.
In this case the LNBs are connected to a so-called Multiswitch from which the signal is via coax cabled to
the satellite receivers (Dreamboxes) in your household.
Two satellites via DiSEqC A/B
Follow these steps:
1. Press the
MENU-Button
to open the main OSD.
