Dream Maker Spas B6L Series, Owner'S Manual

Page: 22 / 26

20
Glossary of Terms
AIR CONTROL VALVE
Mounted on the lip of the spa or at the equipment shroud, to induce air to the jets.
CHECK VALVE
Prevents back flow of water through system.
CONTROL BOX
Basically the brain of the spa. Power is distributed to all functions of the spa, pumps, lights, heat, etc.
DRAIN VALVE
Used in the draining of the spa, looks like an outdoor faucet and fits a standard garden hose.
FILTER
The filter cleans the spa and removes particles and debris and protects the equipment from foreign substances.
FOOTWELL
The bottom of a spa where you place your feet.
G.F.C.I. BREAKER
The electronic switch installed in the power cord to give power to the spa.
HEATER
The thermostatically controlled heater raises the temperature of the water to the desired degree. This is located under
the control box in the equipment area.
JETS
The fittings on your spa that direct the flow of water for massaging action.
pH
Stands for “Potential for Hydrogen” This is the term used to describe the acid (low pH) or alkalinity (high pH) condition
of the water. The ideal pH for spa water is 7.5.
SKIMMER
The skimmer removes surface debris to the filter. The water level in the spa should be kept at the proper range for
optimum skimmer operation.
SUCTION DRAIN
The fitting set into the footwell that drains water from the spa.
TOP CONTROL PANEL
Mounted on the lip of the spa. The digital panel that controls the spas functions.